Model 60. Cools up to 10 Cubic Feet
10.5" h. x 6.5" d., 3" mounting flange, 60 cfm.
115/1/60 only, 1/20 hp., 0.42 amp draw
2.25 sq. ft. filter
Our smallest filter/ventilator. Perfect for small panels like those on individual controlled machines tools! One center wingnut fastens the filter. Round mounting flange.
Accessory kit includes 1 louvered vent for hot air exit and a digital thermometer to monitor internal temperature.
.
Model Number - 60-1PP | Order Number - 10060 |
 |
Model 150. Cools up to 25 Cubic Feet
12" h. x 5" d., 7" deep
3.8" x x4.25" flange, 155 cfm.
115/1/60 only, 1/8 hp., 0.72 amp draw
5.6 sq. ft. filter
Blower casing is power coated steel. The motor is built into the impeller! One center wingnut fastens the filter.
Accessory kit includes 1 louvered vent for hot air exit, air deflector plate for "hot spots", and a digital thermometer to monitor internal temperature.
.
Model Number - 150-1PP | Order Number - 10010 |
 |
Model 500. Cools from 25-200 Cubic Feet
21" h. x 14" d., 12" deep
1 ph - 6/3.3 amps | 3 ph - 1.4/7 amps
TEFC or TENV motor
4" mounting flange nom.
44 square foot filter area. Mount in any position.
Rugged cast aluminum blower casing with square mounting flange. Choice of 1 or 3 phase motor. Huge filter area for long life. 1/2" thick prefilter increases long life of main pleated paper filter. HEPA filter available. One wingnut to change filter!
Accessory kit includes 3 louvered vents for hot air exit, digital thermometer to monitor internal temperature and internal deflector to air cool air at "hot spots".
.
Model Number - 500-1PP | Phase 1 | Order Number - 10190
Model Number - 500-3PP | Phase 1 | Order Number - 10192 |
 |
Model 1000. Cools from 200-500 Cubic Feet
28" h. x 15" d., 13" deep
1200 cfm.
1 ph - 12/6 amps, 3 ph - 3.7/3.4.1.6 amps
TEFC or TENV motor
6" mounting flange nom.
94 square foot filter area. Mount in any position.
Rugged cast aluminum blower casing with square mounting flange. Choice of 1 or 3 phase motor. Huge filter area for long life. 1/2" thick prefilter increases long life of main pleated paper filter. HEPA filter available. One wingnut to change filter!
Accessory kit includes 4 louvered vents for hot air exit, digital thermometer to monitor internal temperature and internal deflector to air cool air at "hot spots"
Model Number - 1000-1PP | Phase 1 | Order Number - 10290
Model Number - 1000-3PP | Phase 3 | Order Number - 10292
|
 |
Model 1400. Cools Up to 600 Cubic Feet
98" h. x 15" w., 15" deep
1200 cfm.
1 HP. -TEFC Motor12/6 amps,
3 ph - 3.7/3.4.1.6 amps
8" mounting flange nom.
45 square foot filter area. Mount in any position
Rugged cast aluminum blower casing with square mounting flange. 3 phase motor. Huge filter area for long life. 1/2" thick prefilter increases long life of main pleated paper filter. HEPA filter available. One wingnut to change filter!
Accessory kit includes 4 louvered vents for hot air exit, digital thermometer to monitor internal temperature and internal deflector to air cool air at "hot spots".
.
Model Number - 1400-1PP | Phase 3 | Order Number - 10831 |
 |
Replacement Filters
|
Custom Units and Modifications
The systems described above are standard stocked products. Blowers can be purchesed without filters, with integral wall or flow mounting brackets. mounted on an adjustable stand, fitted for remote mounting and provided with weatherhoods for outdoor use. HEPA type filters are available for most models. Please contact us if you have special needs!
|
